[email protected]

Sand Washing Machine

Sand Washing Machine

High cleaning rate, Low failure rate

Sand Washing Machine is equipment used for cleaning materials and separating dust, and it usually integrates cleaning, dehydration and classification together. This machine can be used to metallurgy, building materials and hydropower, etc. industries, which is more suitable for building sand.
Applications: Aggregate Field, Concrete Mixing Plant, Dry Mortar Plant Desulfurization, Quartz Sand etc.



XSD series sand washing machine is a kind of wheeled washing equipment, and can clean and separate the dust and powder from the sand. Its new seal-structure and reliable driving device can make sure the cleaning effect and a kind of high efficiency sand washing equipment matched with the sand making machine.

Sand washing machine are mainly used in building site, gravel plant, concrete dam building site of hydropower station, etc., and with features of high degree cleaning-up, reasonable structure, large capacity, low power consumption, small loss of the sands during the washing process, especially for that the drive parts of the sand washing machine are separated from water and sands. So that it has lower failure rate than the usual sand washing machine.


Learn More About Liming® Sand Washing Machine


1. Reasonable structure,
2. Large capacity,
3. Low consumption,
4. Little loss of the sand during the washing process,
5. Low failure rate.


Working Principle


The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.


Specifications - Technical Data

Model Wheel Size (mm) Max feed size (mm) Power (kW) Weight (t) Capacity (t/h) Overall dimension (mm)
XSD2610 Φ2600×1000 10 5.5/7.5 2.6 20-50 3255×1982×2690
XSD2816 Φ2800×1600 10 11/15 4.2 30-60 3540×3000×2880
XSD3016 Φ3000×1600 10 15/20 5.5 50-100 3845×3000×3080
XL915 Ø915×7585 10 11(15) 6.3 60-100 8900×2861×3821
2XL915 Ø915×7585 10 2X11(15) 11.2 120-200 8900×3765×3821
XL1115 Ø1115×9785 10 18.5(25) 10.8 100-175 11270×3645×4340
2XL1115 Ø1115×9785 10 2X18.5(25) 18 200-350 11270×4365×4415